MG90S 9g Metal-Gear Micro Servo

A 4.8V MG90S metal-gear micro servo compatible with the PiicoDev Servo Driver used by Pi Servo Gauge.

SKU: TA0235 Category: Sensors & Components

Description
Reviews (0)

Description

This MG90S micro servo is one of the two servo types explicitly supported by the Meow Meow Scratch Pi Servo Gauge project. Its metal gears are a sturdier alternative to a plastic-geared SG90.

Project compatibility

Operating voltage: 4.8V; typical control is a 50Hz servo PWM signal.
Connect brown to servo ground, red to the external 5V servo supply, and orange to the PiicoDev Servo Driver signal output.
Do not power the servo from a Raspberry Pi GPIO pin.
The guide requires the PiicoDev Servo Driver and a separate 5V supply; both are separate catalogue items.

Merchant SKU: TA0235. Includes servo horns and accessories.